Multi Demolition Shear/Pincer
Product Parameter
| No | Item/Model | Unit | HM04 | HM06 | HM08 | HM10 |
| 1 | Suitable Excavator | Ton | 5~8 | 9~16 | 17~25 | 26~35 |
| 2 | Weight | kg | 800 | 1580 | 2200 | 2750 |
| 3 | Jaw Opening | mm | 750 | 890 | 980 | 1100 |
| 4 | Blade Length | mm | 145 | 160 | 190 | 240 |
| 5 | Crushing Force | Ton | 40 | 58 | 70 | 85 |
| 6 | Cutting Force | Ton | 90 | 115 | 130 | 165 |
| 7 | Oil Flow | Lpm | 110 | 160 | 220 | 240 |
| 8 | Working Pressure | Bar | 140 | 160 | 180 | 200 |
Product Parameter
| Item/model | Unit | Hm06 | Hm08 | Hm10 |
| Suitable excavator | Ton | 14~16 | 17~23 | 25~35 |
| Weight | Kg | 1450 | 2200 | 2700 |
| Jaw opening | Mm | 680 | 853 | 853 |
| Blade length | Mm | 600 | 660 | 660 |
| Click here to learn more about products and parameters | ||||
| Model | HM04 | HM06 | HM08 | HM10 |
| Weight (Kg) | 650 | 910 | 1910 | 2200 |
| Opening (mm) | 627 | 810 | 910 | 910 |
| Height (mm) | 1728 | 2103 | 2426 | 2530 |
| Crushing Force (Ton) | 22-32 | 58 | 55-80 | 80 |
| Cutting Force (Ton) | 78 | 115 | 154 | 154 |
| Working Pressure (MPa) | 30 | 30 | 30 | 30 |
| Suitable Excavator (Ton) | 7-9 | 10-16 | 17-25 | 26-35 |
Project
PRODUCT DETAILS
360°rotation. EATON brand hydraulic motor forhydraulic demolition shear.
Big cylinder make it more powerful.
Using NM 400 steel, light weight andwear-resistant, Q355Mn steel for body.
Pin shaft adopts 42CrMo all high strength and good toughness.
lmported blade.
Cuter block is made of wear-resistantalloy steel, which is resistant to hightemperature and deformation.
Full hydraulic cylinder protectionm.
Faster working cycles thanks to integrated speed valve.
Write your message here and send it to us
